High Efficiency F5 Ceiling Filter for Spray Booth China Factory Suppliers
The F5 Ceiling Filter is a high-performance medium-effect filter medium specifically engineered for spray booth intake systems. Featuring a graduated density structure, the fiber layer increases in density along the air flow direction, which significantly enhances dust-holding capacity while maintaining low initial resistance. This ensures a consistent, clean airflow that is critical for high-quality paint finishes in professional automotive and industrial workshops.
Designed for extreme durability, the medium is treated with a high-temperature powder coating to prevent fiber shedding and breaking, ensuring that no contaminants enter the painting area. Equipped with a polyester grid for uniform air distribution and a non-silicone, anti-volatile solvent composition, this filter is the ideal solution for automobile spray booths, paint workshops, and assembly line ceilings where precision and purity are paramount.
| Filter Grade | F5 / M5 / V600 | Thickness | 20mm / 25mm |
|---|---|---|---|
| Air Velocity | 0.3 - 0.6 m/s | Initial Resistance | 35 Pa |
| Final Resistance | 250 Pa | Efficiency | 98% |
| Dust Capacity | 438 - 500 g/sqm | Thermal Resistance | Up to 120°C |
| Humidity Resistance | 100% Relative Humidity | Backing Material | Polyester Grid / Scrim |
High-temperature powder permeation prevents fiber breakage and shedding, ensuring a contaminant-free painting environment.
High dust-holding capacity (up to 500g/sqm) reduces the frequency of filter replacements and maintenance downtime.
The integrated polyester grid guides air distribution evenly across the ceiling, eliminating turbulence in the booth.
Achieves a 98% filtration efficiency, effectively trapping fine particles to prevent paint surface defects.
Capable of withstanding temperatures up to 120°C, making it suitable for heated spray booth environments.
Formulated without organosilicon and using anti-volatile solvents to avoid chemical interference with paint adhesion.
Optimized stock management for various thickness options (20mm/25mm) to meet different booth specifications.
Strict adherence to F5 filtration standards, ensuring 98% efficiency for every batch produced.
Monitor pressure drops from 35 Pa to 250 Pa to determine the exact replacement cycle.
Documentation of non-silicone and anti-volatile solvent usage for industry safety compliance.
Flexible cutting and roll supply to fit various ceiling roof dimensions for industrial paint shops.
Technical support for calculating ideal air velocity (0.3-0.6m/s) based on booth volume.
| Performance Metric | Standard Ceiling Filter | Premium F5 Composite Filter |
|---|---|---|
| Filtration Efficiency | 80% - 85% | Up to 98% |
| Dust Holding Capacity | Low / Medium | High (438-500 g/sqm) |
| Replacement Frequency | Frequent | Extended Intervals |
| Fiber Shedding Risk | Moderate | Near Zero (Powder Coated) |
| Paint Defect Rate | Higher (Dust Contamination) | Significantly Lower |
The F5 Ceiling Filter is primarily used as an intake filter for the ceilings of automobile spray booths, paint workshops, and assembly workshops to ensure the air entering the painting area is free from dust particles.
The polyester grid acts as a stabilizer and a diffuser, guiding the airflow to be distributed uniformly across the entire surface area, which prevents "dead zones" or turbulent air in the spray booth.
Yes, it is designed for thermal resistance up to 120°C, making it suitable for environments where air is pre-heated before entering the spray booth.
Organosilicons can cause "fish-eyes" or adhesion craters in paint finishes. By using a non-silicone medium, we eliminate the risk of these chemical contaminants ruining the paint job.
The filter should be replaced when the resistance reaches the final resistance limit of 250 Pa, or when you notice a significant drop in air velocity and flow volume.
Absolutely. It is designed to operate effectively at 100% relative humidity, ensuring consistent performance regardless of weather or environmental conditions.
